There are many homeowners out there who don’t know that doing insulation on their attic and ensuring it is in a good condition is important because it has an impact on comfort and energy bill. The many studies that have been done have shown you can end up making savings of between 20 to 50 percent on heating costs. It will also help in melting the snow quicker during a snowstorm, which means it reduces the load on your roof. How can you get started with attic insulation?
What to before the insulation of the attic
1. Examining your Attic
Consider the following aspects when you evaluate your attic:
Getting a good understanding of the attic space and roof structure.
You should look for wet or damp spots because they are a sign of moisture problems. If there is a moisture problem in your attic, find the cause of the problems and deal with it before the insulation.
You should check out the rafters to make sure they are not damaged or sagging.
2. Completely Sealing the Space
Make sure the attic is air sealed. To maintain the desired temperature, you need to eliminate, holes, cracks and any gaps. The best option for air sealing is foam spray insulation. Check the attic and the roof ventilation to make sure there is some level of insulation in the attic.
3. Selecting the Right Insulation
Below are some factors you need to consider when choosing the insulating material for the attic:
R-Value: This is the rating used to show the heat resistance of a material. The higher the R-value, the better the insulation. This can vary from one region to another.
Area Available: the amount of space that needs to be insulated will also determine the best insulation. Look at the space available when choosing the type of insulation to use.
Cost: you need to choose an insulation option that is within your budget.
4. Other Steps to Take Before Insulating
You need to adhere to the following to make sure that the insulation is going to last for many years:
Fixing Roof Leaks
Water damage can cause the growth of molds, which can end up running the insulation. You should look for any signs of water leakage and have the problem fixed before installing the insulation.
Keeping Enough Gap between the Light Fixtures and Insulating Materials
You should keep a 3-5 inch gap between the insulation and light fixtures. This is important to prevent them from touching each other.
Directing All Vents to the Exterior
Make sure that the humid air is not getting trapped inside the home, and you can avoid this problem by properly venting it outside.